Product Description

Product Description

 Good Quality Screw Air Compressor Direct Driven Rotary Compressor for Sale

Features of Diesel Portable Screw Air Compressor:

1.Low operating sound and less vibration design.Easy serviceability.

2.Low fuel consumption to realize far distance outdoor usage; Full protection system, energy saving.

3.High efficient Airend: 
Large diameter rotor, airend connect with diesel engine through coupling and no reduction gear inside, more reliability, the
rotate speed is the same as the diesel engine’s, longer lifespan.

4.Good adaptability: 
The Portable Air Compressor automatically control the air delivery of diesel engine by matching the demand of air consumption,
which equals frequency conversion control in motor power screw air compressor.

Specific performance is as follows: 
 

1.Air filtration system:
    High efficient air inlet filter to prevent motor and airend rotors damaged by dirt particles

2.High efficient airend
    Large rotors design and large bearings are used to ensure low RPM. This ensured low operating sound minimal vibration and extended operating life

3.Modulation Control:
    Based on air demand, the modulation valve will control the inlet air capacity and diesel engine RPM to minimize fuel consumption. Its features maximum energy saving.

4.Control panel:
    easy to control; high water temperature alarm, high-pressure alarm, high discharge air temperature alarm, and high

RPM alarms are all part of its features.
5.Cooler:
    Larger cooler and fan design to ensure maximum cooling especially for the extreme operating environment.

Product Parameters

KSCY-550/13 Diesel Driven portable Screw Air Compressor
Air compressor  
Model No:    KSCY-550/13
Air capacity(m³/min/cfm)    15 (530)
Work pressure(Bar/Psig)    13 (190)
Fluid capacity(L)    48
Compression Stage   Single
Diesel Engine  
Engine Model No.   6BT5.9-C180
Cylinder bore stroke number of cylinders  102*120*6
Capacity (L)  5.9
Rated RPM (r/min)  1800
Unload RPM(r/min)  1400
Rated Power (KW/hp)  132(180)
Fuel Capacity(L)  150
Package  
Noise level db (a)  80±3
Outlet connection  G2*1,G¾*1
Wheel size * Qty  6.5-16×4
Dimension/mm 3450*1520*2220
Weight(KG) 2750

Packaging & Shipping

This screw air compressor can be loaded into 1 20″ container 
We can ship the air comprssor in 7-10days after getting purchasing order 

After Sales Service

1, 24/7 service by chat online and phone.
2, Lifelong and free technical support.
3, Service overseas: if you need, we can dispatch an engineer to your door.

Company Profile

ZheJiang Rancheng Machinery Co.,LTD is 1 professional supplier drilling rigs in China ,we

are dedicated in designing and manufacture water well drilling rigs ,rotary drilling rig ,anchor drilling rig ,DTH drilling rig ,solar pile driver,mud pump ,air compressor and drilling tools etc,we have advanced technology ,Modern equipment, first-class team and rich experience ,our products passed ISO9001 ,CE etc certificated ,they are exported to around 200 countries and areas in the world ,get very good feedbacks from our clients.

We pursue the principle of “Customer First, Integrity First”, we are sincerely expecting to cooperate with you!!!

FAQ

1. Why choose us ?

Rancheng Machinery is a very professional drilling rig supplier in China. We have rich experience in this industry for 11 years. Now our products are serving around the world. we have High Quality, Competitive Price, and Fast Shipment.

 

2. Do you offer any custom designs?

Yes,we have our own trade factory. We provide services to top range partners.Produce a superior product for you by your designs.

 

3, How to make sure the quality we sent to you is same with what we said?

We are the Golded supplier on Alibaba, order through the alibaba trade assurance, will ganrantee the safe of your money and the quality of the goods.

 

4. How To Order ?

Step 1, please tell us what model and quantity you need;

Step 2, then we will make a PI for you to confirm the order details;

Step 3, when we confirmed everything, can arrange the payment;

Step 4, finally we deliver the goods within the stipulated time.

 

5. When will make delivery ?

About 10-15 work days after receipt of the payment.

 

6. After-sales Service

1 year warranty for all kinds of products;

If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.

 

7, Whether we can visit your factory

Yes ,you are warmly welcome to visit us .

Shipping Cost:

Estimated freight per unit.



To be negotiated
After-sales Service: Provide
Warranty: 1 Year
Lubrication Style: Lubricated

air compressor

Can air compressors be used for painting and sandblasting?

Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:

Painting:

Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:

  • Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
  • Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
  • Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.

Sandblasting:

Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:

  • Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
  • Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
  • Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.

When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.

Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

  • Check the power source and ensure the compressor is properly plugged in.
  • Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
  • Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

  • Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
  • Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
  • Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

  • Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
  • Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
  • Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

  • Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
  • Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
  • Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

  • Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
  • Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
  • Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

  • Ensure the compressor’s cooling system is clean and unobstructed.
  • Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
  • Verify that the compressor is not being operated in an excessively hot environment.
  • Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
  • Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China manufacturer Good Quality Screw Air Compressor Direct Driven Rotary Compressor for Sale   air compressor portableChina manufacturer Good Quality Screw Air Compressor Direct Driven Rotary Compressor for Sale   air compressor portable
editor by CX 2023-10-03

Food compressor

As one of the food compressor manufacturers, suppliers, and exporters of mechanical products, We offer food compressors and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of food compressor.

Recent Posts